Independent server validation
Know which BIOS profile each server should run, how it performs under any load, and how to tune it.
Spartan Server Labs tests your servers under each BIOS profile, from 25% to 100% load, and gives you the detailed inventory, power and performance data behind every recommendation.
Talk to usSee the packagesThe problem
Servers arrive with a BIOS profile that rarely matches the workload. The profile changes performance, power draw and stability, yet few teams have time to test every option, and vendor guidance is generic.
Measured, not guessed
Every profile is run under the same load, with power draw recorded at each step, so differences are numbers you can compare.
Safe by design
Your original BIOS settings are saved first and restored at the end. Changes and restarts happen only with your written approval.
Clear deliverables
A Hardware Certification report, an interactive dashboard that works offline, the raw data and a plain recommendation.
Why the profile matters
Two servers of the same model can behave differently because of one setting. A profile that suits a database can waste power on a quiet web tier, and a profile tuned for latency can cost throughput. The only way to know is to measure each one on your hardware.
- Performance, power draw and stability all move with the profile.
- Vendor defaults are generic, and your workload is not.
- A side-by-side comparison turns an opinion into a decision.
Illustration of the shape of a profile comparison. These are not measured results; your report shows your own servers' numbers.
Common questions
Do you need to visit our site?
No. We work remotely and automatically, over your VPN, against Linux or Windows servers and their management controllers.
Will you change our BIOS settings?
Only with your written approval, in windows you agree. Your original settings are saved first and restored at the end.
Which servers do you support?
Automated BIOS profile switching is proven on HPE ProLiant (iLO 5). Dell, Lenovo, Supermicro, Cisco and other Redfish servers are supported after a discovery step and a short trial.
What happens to our data afterwards?
You receive the report, the dashboard and the raw data. We make a verified copy of the results and remove our tools from your servers.
How long does it take?
A Validate engagement takes about half a day per server. Certify is about 30 hours of unattended testing per server.
What we test
Remote and automated, over your VPN, against Linux or Windows servers and their management controllers.
- Inventory and firmware: every CPU, DIMM, disk, network adapter and PCIe device, with firmware versions.
- Power and performance: CPU, memory, disks, network, GPU and whole-system load at 25, 50, 75 and 100%.
- Burn-in under every profile: 4 to 24 hours under each of six BIOS profiles.
- Comparisons: UEFI against Legacy BIOS, Windows against Linux, one server model against another.
Who it is for
Hosting and colocation providers who accept new server batches, and integrators and resellers who ship configured servers and are asked for test reports.
Start with a pilotNot sure which profile your servers should run?
Tell us about your servers. We will explain how a pilot would work, what it would take, and what you would receive.
Request a pilot